WATCH TALK FORUMS banner
1 - 6 of 6 Posts

·
Super Moderator
Joined
·
16,558 Posts


Definitely a man's watch.
And I've encountered the same crown problem, only a different watch. I made a winding tool. I got some precision hexnut drivers and filled one with some epoxy. I waited until it had hardened and then drilled a hole just a hair smaller than the crown's diameter.
It seems to work as long as I remember not to use too much torque.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top