Invicta 26mm band pin replacement

5558 Views 5 Replies 5 Participants Last post by reddevilbr, Mar 12, 2013

Bsw_sc

Discussion Starter · Mar 12, 2013

I have a model# 0063 which has a 26mm rubber watch band with the quick release pins. One of my pins broke, I do like the band and a replacement Invicta band is pricey. Does anyone know if I can replace the quick release pins with standard 26mm watch pins and continue to use my same band? I found a replacement rubber 26mm band for $12.95 which will fit but I like my invicta band with logo!

Save

1 - 1 of 6 Posts

reddevilbr

· #6 · Mar 12, 2013

I have a Lupah (model 12643) that came with 5 bands that have quick-release pins at 26mm. I found a rubber strap on ebay that fit perfect. You should be able to use any 26mm spring bar but like Tim said check the thickness of the spring bars you have. The thicker you can go, the stronger the new spring bar would be.

Save

1 - 1 of 6 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month