WATCH TALK FORUMS banner

1 - 3 of 3 Posts

·
Registered
Joined
·
578 Posts
Discussion Starter #1
Just received her, after taking the movement out of the case, and putting in a fresh battery, she sprang to life, I had to straighten out the seconds hand, since it was bent out of shape, other than that, once she was running, I went to work on sanding down the Case to remove the Engraving, than Polished her up, after giving her a good cleaning, I also had to sand and Polish the Crystal which had some awful scratches, put her back together, put her temporarily on a Military strap to wear her around and see as to her timing, which appears to be flawless thus far...

Hamilton Electric Wrist Watch With No Band Working



Original Auction Photos...







VIDEO's

 

·
Registered
Joined
·
578 Posts
Discussion Starter #3
Had to go back in, she kept on stopping after a few minutes-three times in total, checked the second hand make certain it wasn't sitting to high and having an issue with the crystal when in place, but that appeared normal, I decided to give the balance a little Moebius Oil in the lower stem, put her back together once again, and that appears to have corrected the issue of her stopping.:biggrin:
 
1 - 3 of 3 Posts
Top