WATCH TALK FORUMS banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a invicta 11807 with a foggy crystal.
I have cleaned a few in the past but this movement is new to me and I cant see how to remove it. I already have the back and crown stem removed. I lift up on the movement and it can wiggle a little but wont lift up. There are a few small screws that go around the movement but im afraid of damaging it. Can anyone confirm how this comes out?
someone said it may be a front loaded watch, but would the back still come off if that was the case?
Maybe the bezel needs removed... just not sure
225409
225410
225411
20210523_114637 (2).jpg
20210524_071826.jpg
20210524_071839.jpg

Thanks in Advance
 

·
Registered
Joined
·
7 Posts
before you do that, try one of those little packets that come in perscription bottles.take batt out and just push it in.In a day or two it should clear up.I first tried this on a 224Accutron that looked like a fish tank.I didn't know the first thing about removing the mvmt back then;so I used what I had.I imagine you could also put a glass over it to expediate the effect.costs zip,and actually works.
 
1 - 2 of 2 Posts
Top