WATCH TALK FORUMS banner

Finished product pics / leather straps / and delivery timing!

2K views 6 replies 5 participants last post by  chford 
#1 ·
Hi everyone!

We thought it is about time for an update with some great finished product photos as well as delivery timing… so here you go!

We are also excited to announce that WTF’s owner (Mr. John Holbrook) will be doing a photo review on the Holystone stainless steel model so be sure and keep an eye out for that review in the near future :biggrin:

Watch Photograph White Light Product




We anticipate receiving this 1st batch sometime mid/late next week and will be shipping them out to their proper owners :thumbup1: as fast as we can. Our plan is to reach out to the pre-orders via email in the very near future to confirm addresses have remained the same. Keep an eye on your inboxes!


Important to note
• The first batch that that is inbound is only stainless steel models and will most likely not cover all pre-orders. But a 2nd batch is due within 1-2 weeks and the 3rd (and hopefully final) another 1-2 weeks after that. Thanks again for your time and faith during this process.

Pre-orders will be ending on Wednesday 7/20!!! Get your orders in soon and still take advantage of the $100 discount, a 4th nato strap, and a chance to win a free RedSea watch!

• Lug holes update – as you can tell via our pictures and descriptions the lug holes are drilled all the way through. In order to make the solid endlinks on the bracelet fit perfectly snug against the case it was necessary to drill additional holes on the inside (not all the way through the lugs). For those of you who own a Swiss Army Dive Master 500M (both mecha and quartz) it is the exact same thing on that model. All other straps (natos/rubber/leather) can be changed using the pre-drilled holes on the outside (the bracelet is the only one that will require the inner holes)

• We are very excited to announce we are in discussions with a local strap maker regarding custom RedSea leather straps. More to come on that front but below is what my own Holystone SS will be using. Look for more information about this on our website in the future.

Watch Rectangle Watch accessory Everyday carry Wrist
 
See less See more
2
#6 ·
Hey guys!

Sorry I didn't reply sooner... was up late last night ramping up for next week's shipments.

Regarding the timing of the other batches... we should see the 2nd batch come in about 1-2 after the first. We expect this to be the balance of the SS models and are hopeful it will have some PVD models as well. The 3 batch will have the PVD models and will likely be 1-2 weeks after batch 2.

Right now the PVD models are in lab getting the PVD application done will luming the bezel to follow! We'll keep pushing for speed but the important this is that the end is near :thumbup1:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top