[eljeepguy]

Hello,
Does anytone know how to remove the crown from a 10050 Invicta Pro Diver. Im done scratching my head The watch Internals look like this

 

[mikeyt_53]

I cant get your photo clear enough but there should be a small button right near where the stem goes into the movement. The stem has to be all the way in when you push the button and while held down you can then pull the stem completely out. No need to depress the button when re-inserting.

 

[eljeepguy]

I cant get your photo clear enough but there should be a small button right near where the stem goes into the movement. The stem has to be all the way in when you push the button and while held down you can then pull the stem completely out. No need to depress the button when re-inserting.

Thanks for the reply Mikey,

I've done others and the button is pretty clear sometimes even marks with a small arrow but this one gots me stumped. I even took the metal shield and nothing obvious underneath. The whole to the right of the epoxy is a dud.

 

[SFwatchGuy]

Who makes the movement? Go to their web sight. You usually pull the crown out to position 2 before removing. In some movements the place to press becomes visible in position 2.