WATCH TALK FORUMS banner
1 - 11 of 11 Posts

·
Registered
Joined
·
323 Posts
Discussion Starter · #8 ·
Work progresses on the BR02 strap. This piece has a little bit more character and darker color, than the BR01 strap. It is also thinner and has more rustic edges than the BR01 too. Stitching will be closer to the edges.

 

·
Registered
Joined
·
323 Posts
Discussion Starter · #9 ·
The update from last nights stitching session. Almost there. Need to notch for the buckle tang and punch square holes, both are pending the arrival of my rectangle punch in today's mail. Then build a keeper, and we're done!


The family, the two on each end are from the same WWII ammo pouch:


And this is the next project. A 26mm strap for the Lum Tec Bull in the middle.

 

·
Registered
Joined
·
323 Posts
Discussion Starter · #10 ·
The BR02 on the ammo leather. I think I'm going to have to really treat this strap gently and with some conditioner. It still wants to be somewhat fragile around the edges. Perhaps a bad layout on the piece, when I cut it.


 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top